Better Bumpers
PRICE IS PER INCH. ENTER LENGTH IN INCHES IN THE QUANTITY FIELD.
SHIPS IN 2-4WKS
Simply the best and safest solution to cover the gap between the impact screen and the frame! The triangular shape assists to ricochet the ball towards the screen and away from the frame and bungee gap.
When sized appropriately, Better Bumpers should cover the frame, bungees, and grommets around the perimeter of the screen and once installed, it picture frames the screen perfectly.
Comes in 5" or 8" (XL) width (part against the screen) and can do mitred or square ends.
Product Info
Technical Specs
Return & Refund Policy
Wrapped in an adhesive backed solution dyed no bleed impact resistant fabric. This fabric is unique in that it acts as the loop side of velcro and will adhere to any brand of hook side velcro/hook and loop tape. The color of the fabric is black.
Available with square or mitered corners.
To install simply attach adhesive back hook velcro strips to your tarp clips to secure in place. You can also attach by sliding a piece of hook velcro through your bungees vertically and horizontally.
To order: measure the inside dimensions of your frame sides for the width, measure from the enclosure ceiling to the floor as your height. If you want all 4 pieces to frame in your screen perfectly, select mitered corners otherwise order square corners.
Please note these are shipped rolled up and slight wrinkling can occur. Most relax out after the foam expands back to its original shape but some may remain. Bumpers, panels, and baffles are made with a unique fabric that has a very light nap, which, under certain lighting conditions can vary in color.
